Made available by Touch N' Go Systems, Inc., and the
Law Offices of James B. Gottstein.

You can also go to The Alaska Legal Resource Center or search the entire website search.

Touch N' Go,® the DeskTop In-and-Out Board makes your office run smoother. Visit Touch N' Go's Website to see how.
Title 18 . Environmental Conservation
Chapter 85 . Administrative Enforcement
Section 700. Low powered gas continuous wave and semi-conductor lasers

18 AAC 85.700. Low powered gas continuous wave and semi-conductor lasers

The following are design requirements or recommendations for low powered gas continuous wave and semi-conductor lasers:

(1) All unnecessary reflective material shall be eliminated from the area of the beam.

(2) A diffuse matte should be used to position the beam.

History: Eff. 9/16/71, Register 39

Authority: AS 46.03.020

AS 46.03.260


Note to HTML Version:

The Alaska Administrative Code was automatically converted to HTML from a plain text format. Every effort has been made to ensure its accuracy, but neither Touch N' Go Systems nor the Law Offices of James B. Gottstein can be held responsible for any possible errors. This version of the Alaska Administrative Code is current through June, 2006.

If it is critical that the precise terms of the Alaska Administrative Code be known, it is recommended that more formal sources be consulted. Recent editions of the Alaska Administrative Journal may be obtained from the Alaska Lieutenant Governor's Office on the world wide web. If any errors are found, please e-mail Touch N' Go systems at E-mail. We hope you find this information useful. Copyright 2006. Touch N' Go Systems, Inc. All Rights Reserved.

Last modified 7/05/2006