11 AAC 53.230. Final plat standards

(a) All final plats must conform to the general plat standards stated in sec. 210 of this chapter, and in addition must

(1) have the notary's seal and surveyor's seal properly affixed;

(2) be presented to the division with the original or a good quality reproducible mylar with five blackline prints;

(3) have the original or reproducible and all prints with all original signatures in all of the required places and in black ink only; and

(4) after final approval by the division and by a municipal platting authority, if applicable, be submitted to the district recorder's office for the recording district within which the land surveyed lies, for official filing; if the land surveyed lies in more than one recording district, the plat must be submitted to each for filing.

(b) After filing, the official filing data must be affixed to the plat bearing original signatures, and becomes a part of it. The division will retain the plat bearing original signatures and official filing data. It will send a duplicate original to the municipal platting authority having jurisdiction.

History: Eff. 3/27/80, Register 73

Authority: AS 08.48.221

The Alaska Administrative Code was automatically converted to HTML from a plain text format. Every effort has been made to ensure its accuracy, but neither Touch N' Go Systems nor the Law Offices of James B. Gottstein can be held responsible for any possible errors. This version of the Alaska Administrative Code is current through June, 2006.

If it is critical that the precise terms of the Alaska Administrative Code be known, it is recommended that more formal sources be consulted. Recent editions of the Alaska Administrative Journal may be obtained from the Alaska Lieutenant Governor's Office on the world wide web. If any errors are found, please e-mail Touch N' Go systems at E-mail. We hope you find this information useful. Copyright 2006. Touch N' Go Systems, Inc. All Rights Reserved.